LumberJocks

Basketweave Box w/Roses

  • Advertise with us
Blog series by DonSol updated 10-10-2016 12:34 AM 2 parts 3130 reads 12 comments total

Part 1: Part 2 Assembling the basketweave

10-09-2016 12:04 AM by DonSol | 7 comments »

I had never done a basketweave before so this is the process I came up with. At first it was one of those trial and error things, I’m sure we have all done this. I covered the inside and outside so I had to have 10 panels. A time consuming process, but I would do it again. In this picture I am shading both ends of the pieces. I do enough to make 2 or 3 rows. I put 5 or 6 pieces in and by the time I get the last one in the sand the first one is ready to be turned or taken o...

Read this entry »


Part 2: Part 3 Using the window method

10-10-2016 12:34 AM by DonSol | 5 comments »

In the following drawing the book “The Marquetry Manual” by William A. Lincoln tells you the window method is done by starting with the farthest piece in the background. This would be #1 in the top drawing. Instead of following the lines in the drawing drawing when you come to an adjoining piece you over cut (dotted lines) into the adjoining piece. Put glue all the way around it, with a tooth pic, I put my glue in aplastic coffee can lid. Wait for the glue to dry then draw or t...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com