LumberJocks

Dick_Cheney's Forum Topics

  • Advertise with us
View Dick_Cheney's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (4)buddies (0)favorites (0)activity logWatch
10-04-2016 04:33 AM

Why woodworking pays so little? - 46 replies

Around here it is pretty easy to find an office job that pays 150k+ a year and all you do is hitting some keys on the keyboard and moving the mouse forth and back. I can attest that making a good piece of furniture takes at least no less experience than writing some stupid iphone application however very few do it for living as it is difficult t...

10-01-2016 05:38 AM

Epoxy clear coat? - 0 replies

I cheaped out on materials and made a reception desk from 2×4s and 3/4 pine plywood from HD. In handside knowing all the work that would go in I would buy something better. The plywood is edged with hard maple so corners are protected and I plan to cover horizontal surfaces with epoxy so I am not worried about those. The fir 2×4s are n...

09-30-2016 08:03 PM

How to microadjust table saw fence ? - 19 replies

I replaced my Grizzly with Sawstop PCS lately. What a saw !!!However I cannot figure out how to move the 36” T-Glide fence a little bit. On my Grizzly a few light taps on the fence head would do the trick. With Sawstop it does too but when I tighten the lock the fence aligns square to the rails and all my tapping goes down the drain.Since ...

09-30-2016 06:06 PM

Acceptable snipe. - 5 replies

I got myself a new lunchbox planer. Set up the tables to be higher at the ends than the main table by about 1/16”.Ran a piece of 2×4 on one side only and measured the snipe with a dial indicator. It says the snipe is about 0.004” on one side and maybe 0.003” on another. I can see it if I look for it and can feel it but...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com