LumberJocks

Refurbish, Reclaim or Reject!!

  • Advertise with us
Blog series by Dex378 updated 02-01-2016 03:42 PM 2 parts 2295 reads 8 comments total

Part 1: Picked Up and Old, Early Disston today. Is it too far gone?

02-01-2016 01:50 PM by Dex378 | 4 comments »

So I went to my local salvage/resale store today looking for anything cool they might have up in the tool section. After rummaging through all the junk I found a complete postwar Stanley #4 bench plane for $3.00, some halfway decent rasps for $0.25 each, and few other odds and ends. As I was leaving I decided to dig through all the hand saws they had jammed in an old slop sink. After going through about 30 of them I came across an early Disston. I looked at it for a little while and the handl...

Read this entry »


Part 2: Restoring Vintage Brass Hand Saw Medallions, No Chemicals!

02-01-2016 03:42 PM by Dex378 | 4 comments »

So a little off my main blog but I wanted to clean up the original H. Disston & Sons pre-1917 medallion from my 22” D-8. I’ve used a buffer, Brasso and steel wool, and chemicals on other brass parts before but I didn’t have time to go into my shop today and I didn’t want to lose any of the lettering on the medallion so I decided to try cleaning it up with household items. Here is a list of the items I used:Lemon JuiceBaking PowderA soft clothAn old toothbrush Some ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com