LumberJocks

Davidramsey03's Blog

  • Advertise with us
This blog is written by Davidramsey03 | 2 entries so far

Latest Entry

Cutting Board Learning #2: Making Progress

07-25-2008 08:06 AM by Davidramsey03 | 9 comments »

BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE, I’D LOVE TO HEAR IT. THANKS IN ADVANCE!!!!! Ok, after collecting information from a couple key people, and looking carefully at my pieces, I’ve moved on to Sample #2. First things first. NEW CLAMPS!!!!! Not the best, but all I could get for now. On to business. More blanks, 10 this time. For these, I used a sanding block and norton 3x sandpaper. This was slow, but quiet as it was about 9:00PM when I started, and I’m in my apartment. So, i made about 50-60 passes on each side with 60 grit, adding more to clear up deeper scratches, etc… then moved on to about 30 passes per side with 150, then onto about 15...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com