Dave Polaschek's Blog

  • Advertise with us
This blog is written by Dave Polaschek | 75 entries so far

Latest Entry

Forge table #10: Wrapping it up

01-12-2021 07:12 PM by Dave Polaschek | 7 comments »

Today got the forge table across the finish line. I had a piece of aluminum diamond plate cut to roughly the right size, and today was the day it got attached to the table-top. First up was figuring out how to bend it. I settled on clamping the bent edge in my twin-screw vise, then using a little 2-pound maul to hammer the main part of the plate flat onto my bench. It went pretty smoothly, except on the first corner, I couldn’t figure out which way to cut off the metal for the corner, so I did both. The other corners got cut correctly and folded over the edge, and then I got out a drill and a handful of brass screws and screwed the metal onto the table-top. Once things were scre...

Read this entry »

Older Entries

View all 75 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics