DanTheLumberJockMan's Blog

  • Advertise with us
This blog is written by DanTheLumberJockMan | 1 entry so far

Latest Entry

Multi-Function Workbench

09-08-2008 04:06 PM by DanTheLumberJockMan | 10 comments »

It all starts with a sheet of plywood From there I added the toe kick area The base is put together almost exclusively with pocket screws and glue Then the four sides are added to form a box and the fan was installed. I was lucky to find this squirrel cage fan on Craigs List for $20 Here is the outlet side Then I added these guides which create a funnel shaped section inside the bench. Air and dust gets sucked in through holes in the top, down the angled shelves, through the two filters and clean air exits the side of the bench. Here, one of the angled shelves has been installed And here is a better look at the entire funneling system (on...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics