Craftsman Side Table #3: Tenons and first test fit

  • Advertise with us
Blog entry by DanMelander posted 01-08-2016 12:32 AM 1070 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 2: Milling the Cherry and Leg Mortises Part 3 of Craftsman Side Table series Part 4: Start of Assembly »

Worked on the tenons. Here are some photos of the horizontal router I used.

After some careful setup to make sure everything is square and the depth of the cut is correct, I was able to make all the tenons in a short time.

After tweaking the tenons, I did the first dry fit. Starting to look like a table! Now I need to add some dados for the drawer support pieces, slats, and lower shelf.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics