Dan Krager's Blog

  • Advertise with us
This blog is written by Dan Krager | 24 entries so far

Latest Entry

Making parts #3: Final Step = making donuts

02-29-2020 11:07 PM by Dan Krager | 6 comments »

The final step in this project is well underway. It involves drilling and tapping the hole to match the nibs, and then slicing off the nuts from hex stock. Pretty straightforward. One side of the nut is ever so slightly rounded (edges eased) while the other side is flat. Makes for a nice looking finished nut when installed, I hope. The parting tool is working perfectly, leaving a nice flat back with a tiny burr where it breaks into the thread. It is easily removed with a chamfer tool and touched up with the tap. Six down, six to go. DanK

Read this entry »

Older Entries

View all 24 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics