Built-In Ironing Board Cabinet #2: Cabinet Assembled

  • Advertise with us
Blog entry by Chuck McIntyre posted 07-22-2015 04:04 AM 1158 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 1: Rabbets, dadoes and countersunk screw holes Part 2 of Built-In Ironing Board Cabinet series Part 3: Raised Panel Door Fabrication »

I kind of got away from the blog for a while. Mostly because I haven’t seemed to have had a lot of time to spend in the shop.

I got the panels glued up this past weekend. Got the divider and shelves installed as well as the back. This cabinet project is my first attempt at making raised panel doors. I got the rails and stiles cut and the panels run through the router. I have a Triton 3.25 hp router mounted in a table. The Triton cut through that cherry like nobody’s business. Dialed the speed way down and shaped the panels taking four passes using a Freud raised panel set. I did have to run to Rockler to pick up a different plate for my router table as the hole in my exisitng plate was too small for the panel bit.

I am hoping to get the door put together sometime later this week. I will get some more pictures posted as they are available.

Thanks for looking!

I can’t seem to figure out what I am doing wrong with the pictures. May be an iPad issue. Picture it rotated 90 degrees!

-- Wood is a gift from God that maintains its beauty forever via the hand of a woodworker.

2 comments so far

View cfrance's profile


21 posts in 2145 days

#1 posted 07-23-2015 12:44 PM

Nice project, I love seeing things come together. I recently started blogging in here and had the same sideways picture problem as you. I solved it by rotating the pictures with the stock paint program on my pc. There may be an easier way but it worked for me for now.


-- Life is 20% of what you make it and 80% of how you take it.

View Chuck McIntyre's profile

Chuck McIntyre

81 posts in 2347 days

#2 posted 07-24-2015 05:07 PM

Cfrance, thank you for the tip. I will give that a shot the next time I post a picture.

The ironing board cabinet has been on the back burner all week. I decided to tune up my jointer mid-week and am waiting on the arrival of a new set of knives. On the positive side, it gave me the opportunity to start the outfeed table for my table saw that I so desperately need. Pictures of that will be forthcoming.

-- Wood is a gift from God that maintains its beauty forever via the hand of a woodworker.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics