LumberJocks

Coleman Dodds's Forum Topics

  • Advertise with us
View Coleman Dodds's:homeworkshopprojects (2)blog (0)reviews (0)forum topics (10)buddies (0)favorites (0)activity logWatch
03-04-2020 08:40 PM

Cheap Electrolysis Set Up - 20 replies

So I am wanting to give electrolysis a try and am curious on how you guys have set it up. I want a semi reusable set up that is fairly inexpensive. I am going to need a big enough set up to do a Stanley number 7 jointer plane. Thank you, Coleman Dodds

01-27-2020 03:12 AM

Rikon 10-3061 Fence Adjustment - 14 replies

I just bought the Rikon 10-3061 and after setting it up I can’t seem to figure out how to square my fence to my miter slot. Does anyone have experience with this? Is this a defect or am I missing something? Thank you for your help.

01-22-2020 05:49 AM

Wen 10 in bandsaw or Rikon 10 in deluxe bandsaw? - 8 replies

So I’ve been debating whether to get the Wen 10 in bandsaw or the Rikon 10 in deluxe bandsaw. I’ve done research on both. I’ve seen from multiple sources that the Wen is a good machine for the money, but it is hard to set up and also needs adjusted a lot. I’ve also seen that the Rikon is a very good and a quality machine, but it is also near $20...

01-17-2020 04:29 PM

lumber company in my general area. - 10 replies

I’m looking for better options for lumber. Currently the location that I know of has a small selection. Does anyone know of lumber company’s that are between (or surrounding) the areas of Pittsburgh Pa and Columbus Oh?

01-15-2020 05:40 AM

Crosscut Sleds - 21 replies

I am looking up and thinking about different crosscut sled designs. I am wondering if I should keep it simple or what all I should add to the sled. Should I at T tracts and other accessories? Can you provide pictures of your crosscut sled and tell me what accessories you have found useful. Thank you.

01-11-2020 08:27 AM

Router table fence on a unifence body - 17 replies

I installed a router to the extension table of my table saw. Now I’m trying to figure out a way to use my unifence body as a fence for my router also. I want to be able to position the fence over the bit so I want to have a gap in the fence. If possible I would also like to connect a vacuum attachment to the gap. I am think of using peachtree wo...

12-23-2019 02:45 AM

Sanding marks in finish - 10 replies

I am finishing a bench top with General finish arm r seal. I used 400 grit sandpaper to buff the coat. When I applied the next coat you can see the sanding marks in the finish when you shine light on it. Is this normal. I have never noticed this before. It is definitely in the finish not in the wood.

10-30-2019 05:32 AM

Grain Filling - 23 replies

What is everyones preferred method for filling open grain woods like oak? What are your favorite products to use? Also if you are looking for a darker contrast, what type of product do you use to tint the filler?

10-06-2019 01:07 AM

Unifence Cursor - 24 replies

I just put together a unifence that I purchased and I found that I do not have the cursor for the fence body. Does anyone know where I can find one of these? Thank you.

09-16-2019 02:07 AM

Unifence 52 in. Front Rail - 9 replies

I purchased an unused Delta 10 in. Tilting Arbor Table Saw that came with Unifence, but it did not have the Unifence front rail so I have everything except the front rail. Does anyone know where I can find one of these? Also, are you able to use a biesemeyer fence on the same front rail so that you have the option to use either fence?


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com