LumberJocks

ChipByrd's Forum Topics

  • Advertise with us
View ChipByrd's:homeworkshopprojects (0)blog (0)reviews (1)forum topics (24)buddies (0)favorites (17)activity logWatch
06-09-2016 05:08 PM

Lie Nielsen Mortise Chisels 3/16" & 1/2" - 2 replies

Used, but in good shape. $85 shipped CONUS.

06-09-2016 07:52 AM

Lie Nielsen #62 LA Jack + blades - 7 replies

Hello, I have a Lie Nielsen LA #62 Jack plus two additional blades (presently at 46 & 55 deg) and a toothed blade. There are some scuffs on one side because I mostly used it in a shooting board application. Just checked the site and this package would be $390. I am thinking $290 shipped CONUS. Let me know if you think the price is too high. ...

06-09-2016 07:49 AM

Irwin Marples Dado - 1 reply

Irwin Marples Dado. Not used much. Picked up a Freud so don’t need. $65 shipped CONUS.

10-25-2015 05:07 PM

Storing wipe-on-poly in plastic container? - 3 replies

Hi All, I thought I would again tap into the collective wisdom of the site. I am in the process of finishing several large pieces with wipe on poly. I was wondering if it is dangerous to mix it an keep it in a plastic container for a relatively short period of time; say 4 or 5 days? My wife has saved some Chobani yogurt containers for me (1 q...

03-12-2015 03:04 AM

12/4 Genuine Mahogany - 3 replies

Hello, I have some genuine mahogany that I bought from a local woodworker who retired and sold off all his stock. I had planned to use it, but have since changed my mind. I can’t get my photos to load, so f you are interested, send me a pm with an email and I will forward some pictures. The dimensions are:7 1/4×68 and 9 1/4...

12-09-2014 02:44 PM

Southern Yellow Pine Furniture - 11 replies

Hello, I have a nice stockpile of 2×12 – #1 SYP. I purchased it and stickered it in my garage for a couple months before building my workbench and some other shop furniture/jigs. The problem is (a good one I suppose) that I still have several really nice boards. I was wondering about using it for small furniture projects: stools, e...

08-29-2014 09:46 PM

WB Flatmaster - 6 replies

I would be interested in an 18” or 24” Flatmaster if anyone has one anywhere near Holland, MI.

08-26-2014 02:17 PM

Info about Craftsman 22400 band saw - 5 replies

If I can get this for $150 is that a good deal. I know it won’t be much for resawing, but I can live with that. I have space and budget restrictions. Is this a good saw for curves in material up to 2”? http://kalamazoo.craigslist.org/tls/4624063853.html Thanks,Chip

08-23-2014 07:12 PM

WTB Drum Sander - 0 replies

Looking for a drum sander within 150 miles of Holland, MI. Hoping to keep it around $500, but will go a bit higher depending on quality. Thanks,Chip

08-20-2014 02:56 AM

What's a plane? - 8 replies

O.K., it’s not quite that bad, but close. Today is the first day I’ve ever used a hand plane. I bought a couple at a yard sale and they have been stuffed in a drawer in my shop. I would like to learn how to use them. I was hoping that someone could point me in the right direction. I’m looking for a book/DVD/website that ex...

08-09-2014 04:03 PM

Drum Sander Value - 6 replies

Do you guys have any familiarity with this unit and does this seem like a fair price? http://chicago.craigslist.org/nwi/tls/4576656558.html Thanks,Chip

06-11-2014 01:44 PM

Ridgid R4511 ((SPOKEN FOR)) - 5 replies

This has been a great saw. It has a strong motor and the granite top (which I like because it doesn’t rust). Recently, the mechanism that raises and lowers the blade froze. You will need to replace the screw mechanism and the part is available. I don’t want to mess with it and am using this as an opportunity to upgrade. If there is a...

05-23-2014 03:24 PM

Value of Steel City Table Saw - 6 replies

I hope this is the correct place to post this question. The seller is asking $600 OBO for the saw. Any suggestions on a fair offer? Any opinions on the saw? http://holland.craigslist.org/tls/4480458632.html Thanks,Chip

02-24-2014 01:55 AM

Riving Knife or MJ Splitter - 2 replies

I have a Ridgid R4511 table saw that I really like, but removing the riving knife for dados is a massive pain. The quick release is damaged so I have to remove the whole piece and the reconnect and realign for cutting dados and rabbets. There is no doubt that the riving knife is a great safety feature, but I wondering how much I would be lo...

01-26-2014 02:46 PM

Melting beeswax into BLO - 11 replies

Hi All, I will be gluing up my workbench top this week.  It’s 13/8×4 x 60” SYP.  I have decided on a BLO/beeswax/mineral spirits finish.  My question has to do with safety.  I understand why it is said to use a double boiler to melt the beeswax into the BLO.  The problem is that I don’t have a double boiler.  What I do ...

01-10-2014 04:35 AM

Workbench Top Questions - 5 replies

Hello All, I am building my first workbench.  Next week I hope to begin gluing up my top.  I have SYP cut and sticked in my garage.  After I joint and plane it the final dimensions will be about 1 3/8” x 3 3/4” x 59”.  I have a couple questions and was hoping to tap into the experience of those on the site: First – ...

09-12-2013 04:29 AM

Winter workshop in Michigan - 8 replies

I have a shop question. I am a noob to woodworking and began building my shop this past spring. My shop is in one of our two-car garage stalls. It is the one closest to the house and it stays a bit warmer than the other. However, I am in Michigan and it gets cold. I would like to share my general plan and then ask a question and invite help...

09-03-2013 05:29 PM

Mobile Base for Ridgid R4511 - 8 replies

I have this saw, and the mobile lift isn’t working. I also have a set of these casters from Woodcraft: http://www.woodcraft.com/Product/2021166/25291/WoodRiver-Machine-Leveling-Caster-Plate-Mounted-4-Pack.aspx I was thinking about laminating two 3/4” pieces of plywood and attaching these casters right under where the legs are. A...

08-20-2013 03:57 AM

Hardwood Lumber in West Michigan. - 13 replies

I am in Holland, MI (near Grand Rapids, MI). Any suggestions for places to purchase hardwood?

08-17-2013 11:26 PM

Table Saw Setup Ridgid R4511 - 5 replies

I have a setup question that pertains to my Rigid R4511. When I crank the blade to 90% it doesn’t quite get there. I have a Wixey Digital Gauge that says 89.8%. If I try to crank it that last bit it makes a popping sound and feels like something slips. I crank it back and it goes to 89.8%. As a newbie woodworker, is there something obviou...

1 2 next »
24 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com