CherryO's Forum Topics

  • Advertise with us
View CherryO's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (8)buddies (0)favorites (2)activity logWatch
08-07-2019 02:22 AM

Question on Delta 6" Jointer DJ-15 Hardware - 9 replies

I recently picked up a DJ-15 and it is missing a few socket head cap screws, e.g. M6, M8, M10 in various lengths and quantities. I am on ebay selecting some of the screws based off the parts list, but was wondering a couple things….First, does it matter if I get the 912 DIN standard or just any old ones will do? And second, the parts list...

08-03-2019 03:06 AM

Recommendations for a good Machine Shop in DC Metro Area - 12 replies

My Jointer beds for my DJ-15 are dished around the cutterhead, was looking for some places to take it to have the beds reground in the Washington DC area. Also could other please share what approximate cost would be to regrind these? 6 inch width. Or if people could opine if this can be dealt with without having them ground would love to hear.T...

06-18-2019 02:17 PM

Older Supermax 25x2 Drum Sander Manual - 3 replies

Does anyone have this older model manual? This sander is of the 1993 vintage model 613G01. The drum switch is next to the conveyer knob not vertical above the conveyor. Also curious if this has the intellisand feature. Thanks!

06-16-2019 04:53 PM

Supermax 25x2 Drum sander Question - older model - 7 replies

Hey guys I have the option to buy a 25×2 drum sander by Supermax the old model. does anyone know if this can fit through a 30 inch doorway? A quick response is needed if possible. I have to drive a ways to pick it up and the seller is not responding.Thank you!!

04-29-2019 01:56 AM

Motor Upgrade Question on Performax (Pre Jet) 16-32 Drum Sander - 15 replies

LJs,Yesterday I picked up a Pre-Jet 16-32 DS with a 1HP motor from an estate sale. It appeared to be in decent shape however the coupler half drum was cracked so I had to order a new one. Anyhow, I have a ton of cherry to sand and I am a little worried about burning issues if this thing pops a breaker. As such, I have been thinking that the Sand...

04-10-2017 01:58 AM

I have two Cherry Crotches and would like Ideas - 16 replies

I felled a very large diseased Cherry tree that split into four trunks and ended up with two crotches I’d like to do something with. I do not turn wood so that is out, but was thinking maybe an interesting cutting board. I am new so excuse anything obvious I am leaving out. first one is about 14” long and 10 inches deep and the secon...

03-15-2017 02:02 AM

Need to find Riving Knife options for older Unisaw - 27 replies

Just bought a used Unisaw and it predates the RK features. I did some searching on this forum and others as to what my options are as far as add-on Riving Knives, but the articles seemed a little stale. Just curious what others here believe to be the safest and/or the most practical solution to adding a riving knife(not a splitter). I have found...

03-10-2017 12:12 PM

Need Advice on Used Unisaw Purchase - 38 replies

Pretty new to woodworking and this will be my first tablesaw. I am going to pick up a used Unisaw(with Unifence and router extension with router!!) very soon, that looks to be about 16 years old(2000), perhaps only used for 12 years as I don’t think the year stamp reflects when it was first purchased. I was wondering if the motor was too o...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics