LumberJocks

Builttolastwb's Blog

  • Advertise with us
This blog is written by Builttolastwb | 1 entry so far

Latest Entry

Milling problems #1: Workbench top 2 x 6 hem fir

03-31-2017 05:12 PM by Builttolastwb | 2 comments »

I m not new to woodworking but new to milling. I m in the process of milling 2×6’s down to a little over 5 inches wide for the top of a workbench. I started by jointing one face and one edge, then planing the other face. On some boards, I jointed the other edge, as I do not have a table saw. I was trying to make the best use of tools i have, and get rid of imperfections in the wood. I had bows and cups, and this is # 1 grade hem fir. Btw, I have a new Grizzly 490 8 inch jointer, and a used Dewalt 734 planer. My first 3 boards are perfect. My next three measure 5 1/8 at one end and 5 3/8 at the other, 8 foot 2×6. How can I get off 1/4? I have a little snipe but not...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com