LumberJocks

Buckethead's Favorites

  • Advertise with us
View kaerlighedsbamsen's profile

Adventures in soap

06-08-2014 11:41 AM by kaerlighedsbamsen | 10 comments »

When making my Shop stool #2 I wanted to experiment with using soap flakes as a finish like in a lot of mid-century classics made from light colored wood, mainly beach, white oak, ash, birch and pine/fir. The finish has some nice qualities:- It is natural and can easily be removed - It is the closest you can got to untreated wood and has a nice matte feel and shine- It is easy to repair in case of damage and it can be done at home- It does not darken/color the wood much loke oils and warni...

Read this entry »


View GodofBiscuits's profile

Breathing life into a trusty saw

04-19-2014 11:51 PM by GodofBiscuits | 5 comments »

I bought my Craftsman table saw about 6 years ago now and it’s been a good saw as long as you took extra special care to ensure the horrid fence it came with was straight each and every time you moved it. The fence system that came in these saw is appalling to say the least and down right garbage when compared to a good biesemeyer style fence. Last week using the saw, I moved the fence and spent several minutes trying to get it straight so I didn’t ruin the beautiful piece of curl...

Read this entry »


View Stefflus's profile

Curved chest dovetailing

06-04-2013 05:59 PM by Stefflus | 5 comments »

I’ve been triple dared to show how I dovetailed my chest, so I’ll give it a try. After shaping the walls, I stood them up at the right tilt individually. In this position I could make a simulated miter line by means of a jig that guided a batten with a pencil at the end. After cutting almost to the line at the bandsaw (1mm clearance at bottom, 7mm at top), I stood them up square in corresponding pairs, and at the right tilt. While in this position I could plane the end of ea...

Read this entry »


View WoodJediNTraining's profile

Build a Finger Joint Jig

05-23-2013 04:35 PM by WoodJediNTraining | 15 comments »

Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com