Table Saw Station #2: Saw Installation

  • Advertise with us
Blog entry by Brazz04 posted 05-16-2017 01:56 AM 2391 reads 3 times favorited 1 comment Add to Favorites Watch
« Part 1: Framing Part 2 of Table Saw Station series Part 3: Trim, Vise, Dust Manifold »

I laminated 3/4” plywood and a 3/4” sheet of melamine to form the top of the station. Then I cut the opening for the table saw to be mounted into. I used some planed down 2×4’s to mount and level the saw to the top. Finally on the update, I mounted the rails and the fence. Up next is cutting the router opening, adding the vise, and adding some trim around the top melamine.

1 comment so far

View Rich's profile


5126 posts in 1190 days

#1 posted 05-16-2017 05:27 AM

That’s really looking nice. Great SketchUp model too. It sure makes the build go easier.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics