John's Forum Topics

  • Advertise with us
View John's:homeworkshopprojects (0)blog (1)reviews (0)forum topics (4)buddies (0)favorites (0)activity logWatch
10-14-2017 03:41 AM

Sharkguard - 3 replies

I’m in Canada today but found out my new Sharkguard for my table saw arrived today. I’m really looking forward to setting it up! I’ve heard xa lot of good things about these and hope I’m not disappointed because I really need a set up like this. I bought the adjustable riving knife and the anti kick back pales. I was wond...

10-03-2017 10:33 PM

Glue to hold dowel in hole - 9 replies

I’m making some fly tying racks for spools of thread storage. I drilled the holes with a 1/4” Forstner bit. I’m trying to find a glue that expands a little bit. I believe some of the dowels are slightly undersized. Some fit nicely others are a little play, not a lot but would like glue that with tighten them a little bit. The ...

09-13-2017 11:10 PM

New Switch - 3 replies

I’ve got to replace the switch on my Delta Contractor saw. I bought the saw new some time ago but for numerous reason didn’t get it set up till this spring. I was crosscutting some small maple, stopped the saw to measure the board then it wouldn’t start. It’s been running fine till now. I checked everything and checked th...

08-15-2017 12:49 AM

Slippery Floor - 7 replies

I have a small shop, 12×16 I built myself. The problem I’m having is the floor is getting very slippery, to a point that feels unsafe. The floor is 1X12 southern yellow pine tongue and groove nailed with square cut nails. It’s on top of let paper sandwiched between the pine and 3/4 plywood sub floor on top of pressure teated 2&#...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics