LumberJocks

.

  • Advertise with us
Blog entry by anon posted 08-11-2010 01:16 PM 1826 reads 0 times favorited 5 comments Add to Favorites Watch

.



5 comments so far

View rance's profile

rance

4279 posts in 4406 days


#1 posted 08-11-2010 01:39 PM

Nice progress. Yeah, Frank’s rings are fantastic.

I think if you added an inner bentwood layer(after the outside was built), then you could have your grain running end to end. I havn’t figured out the best way to do that yet.

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

View anon's profile

anon

417 posts in 4142 days


#2 posted 08-11-2010 03:35 PM

cheers mate, thanks for the tip rance :) i’ve seen the double layer rings, but never managed to put two and two together, heheh. let me know if you find out how best to do it :)

View BritBoxmaker's profile

BritBoxmaker

4611 posts in 4282 days


#3 posted 08-11-2010 08:08 PM

Flemming, fine emery paper (up to 1200 grit), usually available in car spares shops should do the trick on the polishing. That and burnishing cream.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging.

View mafe's profile

mafe

13348 posts in 4335 days


#4 posted 08-12-2010 02:20 PM

Hej Flemming,
Yes fine grid, and polish at the end.
120-240-360-600-1200 this is the tour I take on my knifes, if you go directly, you will have the scraches from the rough sandpaper still.
Here are a Danish link for this stuff: http://hanghoi.dk/group.asp?group=29
Feel free to ask questions.

Thats a really fine project, and as usual, you show your wonderful spirit by carving the hole by hand.
Others would say this could not be done without a lathe, a drillpress, a grinder, a shop ventilation system, a carvers set of tools and so on… (I know such one…).
Best of thoughts,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect.

View stefang's profile

stefang

17040 posts in 4580 days


#5 posted 08-16-2010 02:51 PM

Nicely done with minimal tool(s) Flemming and a very nice design too. Coincidentally, the design is somewhat reminiscent of a piece I am just completing and which I will be posting soon. I am always amazed at the carving that can be done with a simple knife in the right hands. keep up the good work.

-- Mike, an American living in Norway.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com