Chest of Drawers #4: Parts is parts.

  • Advertise with us
Blog entry by BlueRidgeDog posted 08-26-2021 09:39 PM 580 reads 1 time favorited 1 comment Add to Favorites Watch
« Part 3: Panels Glued and partial finish Part 4 of Chest of Drawers series Part 5: Carcass »

Top is roughed together. Webs are made and fitted.

I did a mock up of the glue up….a dry fit, but with more depth.

I will glue it up (epoxy as there is no long grain to long grain area of the web to panel joint) with just two webs in, then add the other four. The top goes last as it gets dovetailed in from above.

I still need to cut a rebate in the back for the back. I forgot to do that when making the side stiles. No big.

Good to be in the shop some more and not in the sun getting the trailer ready for a trip.

1 comment so far

View Madmark2's profile


3257 posts in 1926 days

#1 posted 08-26-2021 10:37 PM

Very nice! Keep us posted. I like the corner clamp holders.

-- The hump with the stump and the pump!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics