LumberJocks

BillGo's Blog

  • Advertise with us
This blog is written by BillGo | 8 entries so far

Latest Entry

Striped rolling pin #3: The turn...

02-24-2021 04:09 AM by BillGo | 1 comment »

Much better…. As you can see after the cleanup, the pieces are much more consistent: The pieces were .75” square. Notice that this means that when the blank is turned, the corners of the dark pieces will be taken off first, and the width of the dark pieces will be wider than the white. But as the diameter shrinks, the width of the dark pieces will get narrower, and the white pieces will remain constant. The stripes were equal width at 1.9”. You can also see that the taper at the end, had a consistent narrowing this time. Also the ends now have a more interesting pattern as well with the black center. Now to clean up the ends, sand, and finish. I am ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com