LumberJocks

Stickley Nightstand

  • Advertise with us
Blog series by BigCamGotTheWood updated 06-06-2016 02:20 PM 4 parts 3700 reads 4 comments total

Part 1: Plans and proposal

04-04-2016 01:38 PM by BigCamGotTheWood | 1 comment »

For my project I started by getting everything organized. This step is important so you know what you are doing and where to start in this project. I have my proposal typed out and printed. Also all my measurements and material list are done.

Read this entry »


Part 2: Legs and Aprons

04-08-2016 01:40 PM by BigCamGotTheWood | 0 comments »

I have made my cuts for my final project which are the legs and the top and bottom rails. I have cut pocket holes to screw these peices together. I will use a clamp to hold them down while I screw them togather.

Read this entry »


Part 3: Complete legs

04-20-2016 01:56 PM by BigCamGotTheWood | 2 comments »

In this point of my project, I connected my legs so I have two sides. I screwed them together with pocket holes. I cut out the feet of the nightstand then cut the curve in my top rail on both peices.

Read this entry »


Part 4: Finishing touches and stain

06-06-2016 02:20 PM by BigCamGotTheWood | 1 comment »

For this part of my nightstand series, I added a special walnut stain. After my stain I added 3 coats of polyethylene gloss. I also completed my drawer and added a knob before I stained my peice.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com