This is a side view of the center section of the front entrance showing how this part of the model will slide out with the cabinet.
The sides of the model shown will be made out of glass laminated with a transparent stone pattern.
The roof will also be made out of glass.
All the parts on this model are designed for cutting out of various hardwoods. This shows oak and walnut used for the rail and first level ceiling.
Roof truss, beams, and upper walkways will be made from oak.
These last three I put in to show the rest of the roof truss detail.
Thanks for viewing.
-- Brian, Wind Gap, Pa.
2 comments so far
sras
home | projects | blog
5760 posts in 4100 days
#1 posted 10-26-2013 05:57 PM
This is one ambitious project! I’m going to enjoy following this one.
-- Steve - Impatience is Expensive
helluvawreck
home | projects | blog
32122 posts in 3837 days
#2 posted 10-26-2013 06:30 PM
That is some mighty extensive planning. I sure will like to see how this turns out. Good luck.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
Have your say...