My First WorkBench Build #4: Mounting the tail vise

  • Advertise with us
Blog entry by BerBer5985 posted 02-12-2012 01:43 AM 2249 reads 0 times favorited 4 comments Add to Favorites Watch
« Part 3: Flattening the bottom of the top Part 4 of My First WorkBench Build series Part 5: Making Slow Progress...but Progress »

I decided to go ahead and use the 7” woodworking vise as the end vise. I mortised it into the side all with a chisel and hammer. Next is the chop and dog holes. So then I can use it to prepare the legs which are already cut roughly to size.

-- Greg, Owner, Quality Carpet One,

4 comments so far

View Roger's profile


21047 posts in 3770 days

#1 posted 02-12-2012 01:48 AM

nice chisel job.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View vman154's profile


160 posts in 3395 days

#2 posted 02-12-2012 04:32 AM

nice job one it look good

View DIYaholic's profile


19921 posts in 3641 days

#3 posted 02-12-2012 06:36 AM

Great job! Looking sharp, the chisels that is! Ok, the bench too.

Now that you know what you’re doing…..Please install mine! Oh, can you build the bench also? That’s another thing I haven’t gotten to yet!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View bigfish_95008's profile


250 posts in 4069 days

#4 posted 02-12-2012 02:25 PM

Nice work.

-- bigfish "I am always doing what I cannot do yet, in order to learn how to do it." Vincent Van Gogh

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics