LumberJocks

Benchworx's Blog

  • Advertise with us
This blog is written by Benchworx | 3 entries so far

Latest Entry

Routing, Glue-up & Details

09-05-2016 09:24 PM by Benchworx | 0 comments »

So now that I have the rough lumber down to final dimensions, I marked out the middle of each piece, both vertical and horizontal and then marked 7mm on each side for a 14mm wide dado. The depth was approx 6mm as well, which I had to consider when cutting the horizontal slats. The slats themselves I wanted free floating, as I didn’t want to domino all the slats into one piece, but could have. I did a quick dry fit to ensure there were no problems (other than my camera skills)..... Just prior to glue-up, I added a final touch to the inside of the top rail….. Now it was time to glue-up. With an outdoor project like a gate, its necessary to use a product like ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com