Jumped into a Laguna 14/12 #1: Setup
Well, finally got around to opening and assembling today. Can’t really say I had any issues. After watching and reading everything on this saw for months I knew what documented issues I had seen so I was on the lookout. I saw none of them. Here was the process.1. Assemble while following the Laguna videos. (Per a video I saw I loosened by 1/2 turn the two horizontal bolts that the upper wheel slides on and I replaced the plastic stock insert with a zero clearance insert for better dust collection.) My dust collection is powered by Shop Vac. There was virtually no dust in the base. It ripped and re-sawed perfectly with zero adjustment. So basically, the saw was fine right ...
