The blog of Al Navas, Lumberjock

  • Advertise with us
This blog is written by Al Navas | 44 entries so far

Latest Entry

A small conference table - the build #8: Finish the underside of the top, and get walnut ready for the legs

02-07-2009 03:59 PM by Al Navas | 1 comment »

From my blog - Friday's work: After applying four layers of the Target Coatings’ EM2000wvx topcoat to the underside of the table, it feels like it might be done. However, before turning over the top, to complete the finish on the top side, I will check it again tomorrow morning (Saturday), and decide then. Today I sanded lightly but thoroughly between each application of the topcoat. It paid off, as the fourth and final application today resulted in a wonderfully smooth surface. In the following photo I am using 600 grit sandpaper between spray sessions, slow and easy, until I know it is ready – it will feel ready for the next layer: In between spraying the table top, a...

Read this entry »

Older Entries

View all 44 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics