| This blog is written by AKSteve | 9 entries so far |
-
Entry Way Table #3: Cutting the Legs
Well I have had a delay on my Maple Table top because I am making Drawers for it and I need to cu...
-
Entry Way Table #2: Blind Secret Mitred Dovetail part 2
Well I think I did it! it’s not perfect. there is about 1/32 gap which is fine I can work w...
-
Entry Way Table #1: Secret Blind Mitered Dovetail
Well I started the join today for the Entry Way Table I have started, Dont think I am going to ma...
-
The End!
Well It’s done, I have already posted on the Projects gallery but I wanted to finish up...
-
so close!
Well I cut the mortises today, I used a Drill and a coping saw to cut the mortises out, I lik...
-
not so Koshuo Bench #4: attaching the Beams
Well this will not turn out as I expected but it is becoming something very interesting to say th...
-
not so Koshuo Bench #3: Bench Seat Taper
I Finally got some time to work on the Bench today ! woo hoo ! I scraped and sanded the top and b...
-
not so Koshuo Bench #2: Beams
I finally got some time to work on the beams and the legs yesterday. I got all 4 of the legs ...
-
not so Koshuo Bench #1: Bench
03/05/2012 -I found this Bench on the Internet that really interested me. So I decided to Make it...
