Jet JWCS-10 wave washers arbor bracket and motor plate assembly

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by skeeles posted 02-12-2019 02:20 PM 129 views 0 times favorited 0 replies Add to Favorites Watch
View skeeles's profile


1 post in 4 days

02-12-2019 02:20 PM

Topic tags/keywords: jet jwcs-10 wave washer arbor bracket motor plate resource tip

I bought this tablesaw in 1998. It has worked OK, but I could never fully align the blade with the miter slot. Earlier this winter I decided to totally dismantle the saw and slightly enlarge the trunnion bolt holes so I could move the table top a bit more. All went well, but I think I dismantled a bit too far.

The motor plate is attached to the arbor bracket with a shaft and two wave washers. I took it apart without trouble but cannot get the second wave washer to fit. I am wondering if I have to either heat the motor plate or cool the arbor bracket? I cannot feel any slop with only one wave washer in place, but I sure would like to put it back together as it was intended.

I scanned the parts schematic and parts list into a pdf document. I can email it to you.

Thank you in advance for any help.

gary lemasters
cochrane, WI

0 replies so far

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics