Sacrfical Table Saw Fence Clamp Storage

  • Advertise with us

« back to Jigs & Fixtures forum

Forum topic by Kelly posted 11-09-2015 07:11 PM 1107 views 0 times favorited 2 replies Add to Favorites Watch
View Kelly's profile


2205 posts in 3211 days

11-09-2015 07:11 PM

Topic tags/keywords: fence fence clamps clamps sacrificial sacrificial fence tablesaw table saw tip

After all these years, I got around to buying a couple clamps to hold sacrificial fences to my table saw fence. They work great, and are an alternative to my old method of securing the fence, which involved drilling holes in the both my regular and sacrificial fences, countersinking the holes, then running long screws through both and securing the fences together with threaded knobs.

The only disadvantage of the clamps is, they are not permanently mounted to the sacrificial fence, so must be stored so they can found, when the fence is used.

To solve that problem, I merely made a couple slots in the face of the fence, just below the top, wide enough to, easily, slip Velcro strips through, then turn the clamps over and place them back into the holes, then secure them with the Velcro.

2 replies so far

View bearkatwood's profile


1713 posts in 1279 days

#1 posted 11-09-2015 07:43 PM

Very inventive. It is nice to know where stuff is when you need it. For the beginners out there that are looking for these clamps at a bargain, Lee Valley has some for $6.95 a set.

-- Brian Noel

View intheshop's profile


58 posts in 3106 days

#2 posted 11-09-2015 11:07 PM

Great idea.

-- Fast is fine, but accurate is final. The real trick is learning to take your time when you're in a hurry. - Wyatt Earp

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics