Clamp Storage Project: Wall Panel

  • Advertise with us
Project by EdsCustomWoodCrafts posted 01-14-2016 11:13 PM 1479 views 0 times favorited 1 comment Add to Favorites Watch

About 2 weeks ago I was so fed up with tripping over various styles of clamps and although I have a few types of clamps I don’t have enough if I have 15…

So because my workshop is on the basement I have walls off nothing but concrete walls so before I could figure out what storage method to use for the actual clamps I needed to build a basic panel and mount it to the the wall, and that’s when I found a Ramset basic model ( you hit it with a hammer)my brother in law uses and it’s great I mounted a 60”sq panel consisting of 3/4” ply and some Masonite all mounted to the wall using 2×4s and screws and the Ramset fasteners …

I made the panel larger than I need but I expect my clamp collection to expand and I might also hang a few other things on it to ..

Now I can start sorting out my clamps… Next project F clamp holders..

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”

1 comment so far

View Chubbz's profile


34 posts in 1512 days

#1 posted 01-15-2016 01:58 PM

I like your idea and looks like it will be able to handle a large amount of weight.

I have a similar issue except in my garage. Most of my walls are cinder block walls. Just like you i was tired of not being able to use my walls for storage, so I tapcon’d 2×4’s on a normal stud wall spacing. Turned the 2×4’s so the 3.5” was flat against the wall.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics