Walnut & Maple Segmented bowl

  • Advertise with us
Project by Julian posted 09-06-2015 03:49 AM 1049 views 1 time favorited 1 comment Add to Favorites Watch

Simple bowl made with 12 segments per ring. I used two of my recently made carbide tools. A small detailer and a round cutter set at 30 degrees on the bar. This makes a nice shearing cut on the inside. I used only carbide cutting tools for this bowl. It required little sanding. Sanded to 220 grit, then applied water based polyurethane and paste wax.
Now its time to plan the next turning project.

-- Julian

1 comment so far

View Dutchy's profile


3259 posts in 2435 days

#1 posted 09-06-2015 07:36 AM

Nice bowl Julian.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics