LumberJocks

Woodworking blog entries tagged with 'timber frame joinery'

  • Advertise with us
View LastingBuild's profile

Treadle Lathe #12: Headstock

02-09-2019 03:16 PM by LastingBuild | 1 comment »

The headstock went through several design changes prior to the build. I originally planned to mount the spindle drive wheel (3’ pulley) between the first two posts. I realized the stock was not going to be long enough for the spindle height I wanted. I settled on laminating 6×6 oak stock. The headstock is hollow from front to back with the spindle drive wheel mounted between on a 3/8” rod. The rod is fixed into the headstock with bearings and stop collars. The He...

Read this entry »


View LastingBuild's profile

Treadle Lathe #11: The Frame and Flywheel are complete and installed

02-01-2019 12:23 AM by LastingBuild | 0 comments »

Over the past week, I took apart the frame and did final shaping. I tapered the legs some to give the base a more bulky appearance. This also shifts some of the weight to the base. I added the bearings to leg #1 and #2. I draw bored each leg to its corresponding base. Each leg was labeled using traditional timber frame Roman numeral numbering. The Flywheel was grooved using a series of carving chisels. I created the mortises for each wedged through tenon and the frame was com...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com